UltraTears: Tears of the Kingdom 1.4.3 on PC and Steam Deck
UltraTears, by kuraeow, builds a native version of Tears of the Kingdom (update 1.4.3) for Windows, Linux and the Steam Deck from your own copy of the game. It is a separate static recompilation from TotK Recomp. This page summarises its GitHub repository as checked on November 16, 2026.
UltraTears 0.4.0 on GitHub All releases
No game files are included. You need your own copy of the game with update 1.4.3, dumped from your own console as plain exefs and romfs folders. The project provides no game files, keys, firmware or dumping tools, and UltraTears decrypts nothing. This site does not explain how to obtain any of them. What the build makes is for your own use: do not share it.
Downloads in 0.4.0
| File | For | Size |
|---|---|---|
UltraTears-0.4.0-windows-x86_64.zip | Windows 10/11; can also build the game for a Steam Deck | 160,893,612 bytes (about 160 MB) |
UltraTears.AppImage | Linux and the Steam Deck | 214,469,112 bytes (about 215 MB) |
Published on GitHub on November 11, 2026 (22:52 UTC), not a pre-release. The AppImage keeps the same name in every release, so check the release tag you downloaded it from. SHA-256 (GitHub asset digest): Windows zip 4b24a256…033edd, AppImage 859f94bd…0395da.
Updating to 0.4.0: a big update. The game is rebuilt almost from the start (about 30–40 minutes on a PC, longer on a Steam Deck); saves stay. Accept the update in the launcher, or by hand: extract the new zip over your game folder (Steam Deck / Linux: replace UltraTears.AppImage), start the launcher and click Update the game.
Requirements
| Item | Requirement (README) |
|---|---|
| System | Windows 10/11, or Linux with kernel 6.7+ and glibc 2.34+ (SteamOS 3 has both) |
| GPU | current Vulkan 1.3 driver, 4 GB video memory |
| RAM | 16 GB |
| Disk | about 40 GB free |
| CPU | x86-64; CPUs without AVX2 supported since 0.2.0 |
| Game | your own 1.4.3 dump as exefs and romfs folders (romfs about 304,000 files, 16 GB) |
Installing on Windows
- Download
UltraTears-0.4.0-windows-x86_64.zipand extract it into its own folder. - Start
UltraTears Launcher.exe. If SmartScreen warns, choose More info → Run anyway. - Choose the folder with your
exefsandromfsand click Prepare the game. The launcher checks that it is 1.4.3 and builds the game once (about 30 minutes). - Click Play.
Linux and Steam Deck
- Download
UltraTears.AppImage. On a Steam Deck, do this in Desktop Mode. - In the file’s Properties, on the Permissions tab, turn on Allow executing file as program, then start it.
- Choose the folder with
exefsandromfsand click Prepare the game. - Add
UltraTears.AppImagefrom the game folder to Steam as a non-Steam game. With--playin its launch options it starts the game directly. Start it from Gaming Mode.
Alternatively, prepare it on a Windows PC: choose For Linux (Steam Deck) or Both platforms next to Prepare the game, then extract the resulting UltraTears-SteamDeck.tar (about 28 GB) on the Deck and continue from step 4.
Release history
| Version | Date | Highlights |
|---|---|---|
| 0.4.0 | Nov 11, 2026 | smoother and faster (GPU starts on a frame while it is still recorded, game code built with a run profile, far fewer streaming hitches, shrines at full speed); Steam Deck at least 40 fps in about 95% of places; FSR 3.1 and SMAA; mods folder, ExeFS patches and Atmosphère cheats in a new Mods tab; PC keyboard layout and mouse camera; Xbox / Steam Deck layout and full rebinding; fixes for crashes with Recall / Ultrahand, naming a horse and Chinese or Korean text; full rebuild 30–40 min |
| 0.3.1 | Nov 3, 2026 | urgent performance update: about 35–40% less GPU time per frame, about 40% less CPU time recording GPU commands, far fewer hitches; Steam Deck about a third less GPU time per frame; full rebuild 30–40 min |
| 0.3.0 | Nov 2, 2026 | Depths ground, cave walls and lighting fixed on Steam Deck/AMD; gyro aiming without drift, also on the Deck; roughly 10–15% more fps in busy places; flickering fog on AMD fixed |
| 0.2.0 | Nov 1, 2026 | launcher replaces setup.bat; experimental Steam Deck/Linux build; 60 fps (up to 240 as a beta); any resolution and shape, FSR 1; shaders compiled ahead; AMD black screen fixed; CPUs without AVX2 |
| 0.1.0-beta | Oct 25, 2026 | first public build (Windows builder, setup.bat, about 30 minutes) |
Known issues in 0.4.0 (release notes): FSR 3.1 may show lighting problems for now (a fix is planned; use FSR 1 or None until then); a few busy places can still dip below 40 fps on the Steam Deck; short bright flashes on the Steam Deck’s title screen; a texture from a mod causes a short hitch the first time it is seen. Recent open reports on GitHub include the launcher not recognising extracted 1.4.3 exefs/romfs folders (#91) and FSR 3.1 (#89).
UltraTears vs TotK Recomp
| UltraTears | TotK Recomp | |
|---|---|---|
| Developer / repository | kuraeow / kuraeow/ultratears | valentderah / valentderah/totk-pc-recomp |
| Latest release (Nov 16) | 0.4.0 (Nov 11) | 0.4.1 (Nov 15) |
| Game versions | 1.4.3 only | 1.1.0, 1.2.1 or 1.4.3 |
| What you point it at | extracted exefs/romfs folders; decrypts nothing | game packages (NSP/XCI) and update, plus your console’s keys |
| Setup | own launcher: Prepare the game, then Play | graphical installer that builds totk.exe |
| Download size | ≈160 MB zip / ≈215 MB AppImage | ≈166 MB zip / ≈231 MB AppImage |
| Steam Deck | build on the Deck from the AppImage, or on Windows as a ≈28 GB tar; at least 40 fps in about 95% of places (0.4.0) | Linux AppImage with Deck defaults (1280x800, 40 fps); community-tested |
| Settings | in the launcher (window, resolution, scene scale, sharpness, frame limit, V-Sync, FPS counter; Controls and Mods tabs since 0.4.0) | in-game F1 menu and totk.ini |
| Upscaling | FSR 1, FSR 3.1 (0.4.0); SMAA | FSR 1, NVIDIA DLSS/DLAA |
| Mouse camera | yes (0.4.0) | yes |
| Mods / cheats | RomFS mods, ExeFS patches, Atmosphère cheats (0.4.0) | yes |
| Setup / menu languages | English, Russian | English, Russian, Brazilian Portuguese, Simplified Chinese |
| Licence | GPL-3.0 | MIT |
| GitHub stars (Nov 16) | 929 | 7,478 |
Saves and builds are not interchangeable between the two. If you only have 1.4.3 folders already extracted and want a tool that reads no keys, UltraTears fits. For DLSS, an in-game settings menu, HD texture packs and older game versions, TotK Recomp fits. Full table with SkyboundTOTK: TotK PC ports compared. Both are listed in Recomp Launcher.
Controls
The controller layout follows the Switch (A is the right button); on the Steam Deck it follows the Deck’s own labels (A is the bottom button). Since 0.4.0 every button and key can be rebound in the launcher’s Controls tab, an Xbox / Steam Deck layout is available, button prompts follow your bindings, and the Sticks and gyro page sets dead zones for a drifting stick. Since 0.3.0 gyro aiming works without drift, also on the Steam Deck’s built-in controls. On a PC, a controller that reports motion, such as the DualSense, is the usual choice for gyro aiming; an Xbox Wireless Controller has no gyro but works for everything else.
As an Amazon Associate, this site earns from qualifying purchases. Controller links go to Amazon.
Keyboard and mouse (0.4.0 layout): WASD move, the mouse (or the arrow keys) turns the camera and aims, E = A, Left Shift = B, Space = X, left click / T = Y, Q = L, R = R, right click / Z = ZL, F / X = ZR, Esc = + (menu), Tab / M = − (map), Left Ctrl / C = stick buttons, 1 2 3 4 = d-pad (the mouse’s side buttons are left and right), F11 or Alt+Enter full screen. Mouse sensitivity, bow sensitivity and inverted up/down are on the Keyboard page of the launcher’s Controls tab.
Mods and cheats
Since 0.4.0 mods made for the Switch emulators work as they are. In the launcher’s Mods tab click Open mods folder and unpack each mod into its own folder there, so its romfs, exefs or cheats folder sits directly inside. The same tab turns each mod and cheat on or off and sets their order (the higher mod wins when two change the same file); nothing needs a rebuild. Supported for game version 1.4.3: RomFS mods, ExeFS patches (.ips, .pchtxt) and Atmosphère cheats. On Linux and the Steam Deck, code patches and code cheats need the game folder set up by the AppImage. This site does not host or link any mods.
Reporting problems
Use the UltraTears issue tracker and attach ultratears.log from the game folder. Problems with TotK Recomp belong on its own tracker; see TotK Recomp fixes.
FAQ
What is UltraTears?
UltraTears is an open-source project by kuraeow that builds a native version of Tears of the Kingdom 1.4.3 for Windows, Linux and the Steam Deck from your own copy of the game. It is not an emulator: the game’s code is translated to native code ahead of time, and shaders and textures are prepared while the game is built. The latest release on November 16, 2026 is 0.4.0 (November 11, 2026).
Is UltraTears the same as TotK Recomp?
No. They are separate projects by separate developers (kuraeow and valentderah) with separate repositories, releases and saves. Both use static recompilation. UltraTears supports only update 1.4.3 and reads already-extracted exefs and romfs folders. TotK Recomp supports 1.1.0, 1.2.1 and 1.4.3 and builds from the game packages and keys.
Does UltraTears run on Steam Deck?
Yes, as a native Linux build. Either run UltraTears.AppImage on the Deck in Desktop Mode and prepare the game there, or prepare it on a Windows PC with “For Linux (Steam Deck)” and copy the resulting UltraTears-SteamDeck.tar (about 28 GB) to the Deck. Add the AppImage to Steam as a non-Steam game with --play to start it from Gaming Mode. 0.3.0 fixed the Depths and gyro aiming on the Deck, 0.3.1 made it faster, and 0.4.0 (November 11) holds at least 40 fps in about 95% of places on the Deck: its notes recommend a frame limit of 40 in the launcher, the Steam overlay frame limit off, and 80 Hz on a Steam Deck OLED.
How big is the UltraTears download?
0.4.0: UltraTears-0.4.0-windows-x86_64.zip is 160,893,612 bytes (about 160 MB) and UltraTears.AppImage is 214,469,112 bytes (about 215 MB). Preparing the game then needs about 40 GB free.
How long does UltraTears take to set up?
The first build takes about 30 minutes. Big updates such as 0.3.0, 0.3.1 and 0.4.0 rebuild the game almost from the start, about 30–40 minutes on a PC and longer on a Steam Deck; saves in userdata are kept.
Does UltraTears include the game or keys?
No. The README says no game files, keys, firmware or dumping tools are provided and UltraTears decrypts nothing. Everything made from the game is made on your PC, for your own use. This site does not explain how to obtain any of those files.
Does UltraTears support mouse camera, mods or DLSS?
Mouse camera and mods: yes, since 0.4.0 (November 11, 2026). The mouse turns every camera and aims, and the launcher’s new Mods tab switches RomFS mods, ExeFS patches and Atmosphère cheats on or off without rebuilding the game. DLSS: no; upscaling is FSR 1 or, since 0.4.0, FSR 3.1, with SMAA as an alternative to FXAA. TotK Recomp also has NVIDIA DLSS/DLAA; see the comparison.
Can I use UltraTears with Recomp Launcher?
UltraTears is listed in the RecompLauncher catalogue, which downloads it from its GitHub release. UltraTears also has its own launcher, which checks for updates at every start (since 0.3.0).